So, here’s something that I picked up at my local flea-market on the weekend. It was dusty, grimy, battered, and very, very faded. Despite that, a cursory examination told me that it was actually in excellent condition, despite being, what I judged, to be upwards of 100+ years old! It took me all of five minutes to decide that I really wanted this, and haggled a discounted price with the stallholder, and trotted away a very, very happy young man.

Once I got the folio home, I started examining it in more detail.

The more I looked at it, the more it appeared to me that this beautiful leather-good was significantly older than I initially believed. The styling of the pockets, as well as their general orientation and size, as well as the tri-opening panels, were all reminiscent of men’s wallets from the Edwardian era of the early 1900s – only – larger. Much larger!

Added to these observations was the fact that the folio was devoid of any modern features. No zippers, no snap-buttons, no elastic strap to hold it shut, no plastic of any kind, and – surprisingly – no indication at all – of where it was made! There wasn’t a thing on it, or in it, to tell me anything about it! No maker’s marks, no company logos, trademarks, company names, retailers’ addresses…nothing!

Once I got it home, I started the restoration process. This mostly consisted of double-checking, and reinforcing any loose or missing stitching – and going through the original needle-holes, where possible, to hold the folio together (fortunately, there wasn’t much of this which had to be done!). The next step was to clean the leather, and then came the labourous task of polishing it.

For this, I used ordinary dark tan boot-polish…and my right hand. Honestly, I just find it so much easier to apply shoe polish with your fingers, than fiddling around with a cloth or polishing rag of some kind. I just scooped it up, smeared it onto the leather, and started rubbing it in with my fingers. Once it was on, I just used a regular buffing brush to distribute and work the polish into the grain, spreading it out, and in, as I went. This was the real calorie-burner! I started on the outside and worked my way in, removing the belt entirely because it’d just get in the way (I polished that separately, later on).

The next thing to do was to do the interior. This was much more fiddly because of all the pockets and sleeves, but I got there in the end. Here, you can see what the folio looked like originally, vs. what it looked like when I was done…

Originally, the entire folio was this sort of…paper-bag brown. You can still see hints of the original colour showing through, where it had faded over the years (this also accounts for the uneven colour-distribution on the left and right). The interior received the same hand-applied polish and brushing, and then the entire thing was rubbed all over with a generous amount of dubbin.

Here you can see the final product, with the folio closed-up and belted…

…and the other side…

One element which I really loved was the decorative tooling around the belt-loop:

And finally, the interior…

If you look on the right, you might be able to see a light discolouration – a horizontal line running across the middle of the panel – that’s the result of the strap or belt being fastened across it for years and years, and the leather fading as a result.

Here it is fully opened…

On the left are three pockets (two small ones on top, one big one underneath). Next to them is the loop or sleeve to hold a writing instrument. The loop is VERY small. It will hold a pencil, or a dip pen, but that’s about it! Part of the restoration will have to involve enlarging (or replacing) this loop so that the folio can actually store at least one, decent sized fountain pen for the future!

The central panel holds one large pocket for storing documents, and three smaller ones for storing stamps and cards. Finally, on the right is one more large pocket, again for storing papers and documents. If you look very close, you can see the remains of an elastic strap sewn into the leather bordering, which would’ve been used to hold a notebook in place. Replacing that will be another part of the restoration.

Restoring the Folio

Apart from cleaning, polishing and rubbing in beeswax, the folio needed a few minor repairs and alterations. I hand-sewed some of the corners and edges where the stitching had come undone, to hold the folio together and to stop the pockets from tearing. Where possible I used the original stitch-holes to keep things neat, and also to preserve the integrity of the leather.

The next step was replacing the pen-loop. The original loop was extremely small and a pencil barely fit inside. To remove it, I cut away the original stitching using a pocketknife, removed the old leather forming the loop, used it as a pattern to cut a new piece of very thin leather, folded it over, stuck it inside, and using my sewing machine, I sewed the new loop back into place where the old one had been – again, using the original stitching-holes to try and keep things neat. The change is barely perceptible, but now, the new loop can actually hold a pen! I deliberately sewed the new loop out from the seam by about half a centimeter or thereabouts, so that it could fit a decent-sized modern fountain pen (and most vintage ones, too).

The final step in the restoration was sewing in a new, black elastic book strap (see above). To do this, I cut the stitches around the old book strap, removed the worn out remains of the old elastic, fed the new elastic through the same hole and sewed it back in. Then I stretched the elastic across, repeated the same thing on the other side, and sewed that in as well. To get the tension right (if it’s too loose, the book will just flop around everywhere), I measured the length, and then cut off two inches so that the elastic would have to stretch the last two inches, giving the right tension.

And here’s the final result:

As you can see, there have been a few changes. The enlarged pen-loop will now hold a modern cartridge-converter sized fountain pen (the pen in question is a Montblanc No. 145), and it has been made out of leather of a very similar shade to the original. In time, it will age to look more or less exactly the same.

The black elastic strap now holds the book in place, allowing me to flip it over either side, and access the two large pockets without having to remove the book entirely.

All in all, a great result!

Not bad for a $15.00 purchase at the flea-market.