Scuttling Along…

I took up traditional wetshaving in January this year. That means shaving-soap, shaving-brush, double-edged safety-razor, razor-sharpener and of course…having somewhere to mix up my shaving-soap. Oh…and hot water, as Jeremy Brett is constantly yelling out to Mrs. Hudson for, in the Granada ‘Sherlock Holmes’ series.

While toddling through the flea-market recently, I came across a real blast from the past, a gentlemens’ bathroom accessory that went out the window in the mid 20th century along with the straight-razor, strop, hone and probably Brilliantine as well. It had been something that I’d been after for a couple of months, and at the pittance of $10, I bought it. What was it? Have a look below…

How many things here could you identify?

Badger-hair shaving-brush? Check.
Proraso shaving-soap in a round, white plastic tub? Check.
Three-piece, double-edged razor and blade? Check.
Little white ceramic spoon for measuring Proraso shaving-soap in a round, white plastic tub? Check.

But then your eye might be drawn to the weird, juggymuggy thing hanging around in the background…the hell is that?

Unless you’re a wetshaver like I am, you’ve probably never seen one or knew they existed or knew what they’re called! But of course, if you use pressurised shaving-cream and a Mach5 razor or one of those vibrating electric ones, you wouldn’t need one of these archaic doowhackies, would you?

For $10, that is officially my cheapest single shaving-accessory purchase. If you’ve never seen one before, it’s called a shaving-scuttle. Cute, huh?

This thing is so unique and whimsical these days, that I thought I should do a little writeup about it.

What is a Shaving-Scuttle?

A shaving-scuttle is a mix between a jug, a mug and a scuttle and their original purpose was to provide the shaver with a ready supply of hot water. When they were invented in the second half of the 19th century, running hot water was a luxury that few people could afford. The man of the house would fill up his shaving-scuttle with boiling water from the kettle on the kitchen stove and carry it back to his washstand or bathroom to commence the day’s shaving. Hot water is an essential in traditional shaving because it relaxes the face and pores and softens up your stubble, making it easier to shave off.

How it was Used

Once the scuttle was full of water, the shaving-brush was shoved into it, through the spout…

…the purpose of this was to warm up the brush, soften it and let it retain some water for the task ahead, which was to work up a lather on the block of hard shaving-soap that would traditionally have sat in the circular bowl or well in the top of the scuttle. In the photo above, you might see a series of holes in the well of the scuttle. Those were there to drain away any excess water used in the lathering process. Unwanted water simply dribbled back into the main, lower chamber of the scuttle, keeping neatly out of the way. With the brush lathered up, the shaver could then create a nice smooth lather, either directly to his face or in a mixing-bowl.


A scuttle with a block or ‘puck’ of hard shaving-soap in the scuttle-well at the top. This is how they were traditionally used

Using a Shaving Scuttle Today

With the steady increase of access to running hot water, the necessity for the shaving-scuttle died away as the 20th century progressed. That said, some people still make shaving-scuttles, out of either clay (which is what mine is made of) or pewter, and some people, like me, still use scuttles. You can use them the old-fashioned way with blocks of hard soap (which are still manufactured and can be purchased at a good bodycare shop or online) or you can do what I do, and use them with softer shaving-soap like Proraso.

I’ve had a lot of people say things like:

“Oh you can’t do that, the bowl at the top is too small…”
“The hot water will heat the scuttle up too much and turn your soap to mush”.
“The soap will dribble through the drainage-holes. It won’t work!”

Well amazingly enough…they’ve all been wrong. After a bit of experimenting, I’ve concluded that you can actually mix up a great lather in the bowl of a shaving-scuttle, in spite of the drainage-holes in the way. In fact I find that the drainage-holes help! They drain away any excess water that might get the soap too sloppy and slippery, but on the other hand, it only takes a slight tilt of the scuttle to let water dribble into the bowl through the drainage-holes in reverse, to add extra water, if your soap is too dry. Being able to regulate the amount of water like this makes it so much easier to mix up a nice lather using a scuttle than a conventional mixing-bowl.

Some would say that no matter what I say or what others might think, the scuttle is obsolete and little more than a novelty item today. But even if the scuttle is just a cutesy little bathroom trinket, a souvenier and leftover from the Victorian age, it has one nice feature – it helps you save water, since you only need a minimal amount of hot/warm water to soak your brush in the scuttle and to mix up your lather!

And the scuttle can serve as a curious, noodle-scratching display-piece for relations to puzzle over when they come to visit, and see this weird, whacky thing sitting on your bathroom counter, if it does nothing else at all.

 

4 thoughts on “Scuttling Along…

  1. Ted Larson says:

    Where can I get one that is not too expensive?

     
    • scheong says:

      Hi Ted,

      You can find them at flea-markets and antiques shops for not very much at all (in my experience, rarely over $20). But if you want a brand new one, I believe you can buy them from ClassicShaving.com (check their section on mugs and bowls etc).

       
  2. Ted Larson says:

    Where can I get one that is not too expensive?

     
    • scheong says:

      Hi Ted,

      You can find them at flea-markets and antiques shops for not very much at all (in my experience, rarely over $20). But if you want a brand new one, I believe you can buy them from ClassicShaving.com (check their section on mugs and bowls etc).

       

Leave a Reply

Your email address will not be published. Required fields are marked *