The Idiot and The Odyssey: The Complete Restoration of my Grandmother’s Singer Sewing Machine

In looking back over my blog, I realise that it’s been over a year since I started the seemingly ludicrous mission of restoring my grandmother’s 1950 Singer 99k sewing-machine. I am proud to say that as of the date of this posting, the restoration is complete!

Gran was born on the 7th of May, 1914 in Singapore. She died on the 28th of November, 2011, in Melbourne, Australia. Weet-Bix are suspected to have played a role in her demise. She was 97.

Granny was a dressmaker, and from the early 1950s until the early 1980s, was in this trade professionally. When she retired, she moved to Australia, and her Singer sewing machine came with her. A battered, but trusty Singer 99k knee-lever electric sewing machine. This machine was gran’s life and she used it in place of any other machine that might ever have been, or might have become available for her to use.

When gran moved to the nursing-home, in the early 2000s after worsening Alzheimer’s Disease, her most treasured possession, her Singer, was placed in the basement, where for the next eight or-so years, it sat in a corner at the bottom of a bookcase, gathering dust.

When gran died, I hauled the machine out of the basement and began a steady restoration process. I don’t know what possessed me to do this, other than the fact that this machine was gran’s livelihood for most of her adult life.

The majority of what happened next is covered in my earlier article. This posting is more of an addendum to what I’ve already written.

The Frankenstein Moment

MUAHAHAHAHAHAHAHAHA!!!

*Thunderclap!!*
*Flashlightning!*

…Ahem.

Actually getting the machine running and sewing for the first time really was an exhilarating experience. Second only to getting the machine-case off the base! It took a lot of oil and fiddling with a screwdriver, but I got it off eventually, and was very happy.

Getting the machine running was a considerable task. It was literally frozen solid when I got the lid off the machine-base, and not a single thing apart from the presser-foot lever and the bobbin-winder worked. Everything else was jammed solid from a complete and total absence of lubrication. And it’s no exaggeration to say that it took me nearly a week to lubricate the entire machine to a level where it would run as well as it did when it was brand-new.

I must admit, it was rather fun. There is the incredible thrill of a challenge, combined with the later sense of accomplishment, when it came to getting that machine running again.

I had almost given up at one point, but perseverance was the key. It was a real joy to see it running at full speed again, for the first time in probably ten years (or whenever the last time it was used, happened to be. At least ten years ago, though).

Duhr…Now What?

It’s working! Oh my god it’s working! It runs, it stitches, it sews, it runs at every speed,  the light turns on, gets hot enough to fry breakfast on, and then turns off. Everything is excellent! But what do we do now, huh?

I really wasn’t sure. Like I said, I didn’t have any real reasons for wanting to bring this thing out of the basement other than to tinker around with it. But once I’d got it running, I started thinking about these other things that I could do. And that’s when the thought entered my head that I could bring the machine back to its former glory, by tracking down and purchasing all the necessary bits and pieces for it. I had no idea where on earth I would begin. But as luck would have it, I live very close to a large and very well-stocked flea-market. And it was from that market that I purchased nearly everything for this machine.

The Scavenger Hunt

I started with simple things, like needles and bobbins. These were pretty easy to find. And all the while, I was busy cleaning and fixing the machine. It was like a gunk-generator. Every time I thought it was clean, I’d find some other part of the machine that required my attention. Like under the bed. Or behind the balance-wheel, or inside the electric motor, or underneath the bobbin-case. On top of everything, the machine required constant lubrication! It drinks oil like Barney Gumble drinks Duff Beer.

The harder things which I had to track down were the sewing-machine accessories boxes, the attachments that went inside them, the accessories that went with them, and the green oil-can that went inside the machine-case. I had no idea what these things looked like, and it took a long time to track them down. I actually ended up buying multiple boxes of attachments and pouring them all out, and scrambling them around until I had assembled one FULL box of attachments from the dribs and drabs found in other boxes. Those dribs and drabs would be useful for spares later on.

One big problem with this machine was finding the original square steel bobbin-plate or ‘slide-plate’. The slide-plate was a protective metal plate that shielded the spinning bobbin-mechanism from dust and tangling threads. There wasn’t anywhere local that I could buy one, and waiting for one to show up at the flea-market would take years.

The only way I could get one was to buy a replacement online. You can buy ORIGINAL Singer plates online (and there are people who sell these), but obviously, stock is limited, and as a result, prices are much higher. I had serious doubts about this. So instead, I went the reproduction route. With the help of a cousin, we bought the replacement plate from an eBay store based in the U.S.A., and had it shipped halfway around the world to…here.

Boy that took so long. I think it was something like a month or more, of waiting.

Finding the oil-can for the sewing-machine was rather challenging. There are all kinds of Singer oil-cans and bottles. And I had no idea which one I would need to fit the slot inside the case-lid. All I knew from what I saw, was that it had to have a flange at the bottom, and it had to have a curved base. Out of sheer luck, I found the can which I needed at the flea-market, hidden in the pre-dawn mists, amongst a bookcase full of all kinds of other cans which were for sale. I paid $5 for it and walked off.

Sentimental Attachments

Finding all the attachments for the sewing-machine was another big challenge. No one box of parts which I bought ever had the full set. So I was forced to buy four or five boxes of parts, and slowly piece them together, to form one big box of attachments. In the end, I had enough bits and pieces around to create two complete boxes!

On top of all the usual steel attachments, was the challenge of finding the zigzagger and buttonholer attachments. These old Singer sewing machines performed a very basic straight lockstitch. To allow these machines to make more complicated things like zigzags and buttonholes like modern machines can, the manufacturers came up with all kinds of fascinating gizmoes which you could bolt onto your machine.

Quality of Manufacture

One thing that I love about all these items is the quality of manufacture. The bobbins, the attachments, screws, plates…everything is made of solid steel, without exception. Nothing like that exists today. Today, bobbins are made of plastic, feet and other attachments are made of plastic. Even the screws are made of plastic. One crack or warping renders them useless. The older steel parts are nigh indestructable.

It’s stiff? Oil it. It’s rusty? Sand it. It’s dull? Polish it.

With plastic parts…it’s cracked?…Uh…I dunno. Throw it out and buy another one?

Money wasted and thrown down the toilet.

These steel pieces will literally last forever. And their simple, no-nonsense construction means that they will always do the job that they were made for, without any compromising on quality. Back in the good old days, this was standard. These days, we have to pay extra for quality that should come with the original product. Which doesn’t. They literally don’t make ’em like they used to.

The Last Piece

By the start of 2013, I had finally gathered all of the main components of the sewing-machine. I had the needles, oil, feet-attachments, the two main mechanical attachments, instruction manuals and other dribs and drabs. However, one piece remained elusive. The bed-extension table.

The bed-extension table came with most Singer sewing machines and it was used to extend the bed of the machine, to give you a larger work-area. This had the advantage of stopping your sewing-piece from sliding off the end of the machine-bed, and pulling your carefully-pinned cloth out of alignment with the needle and presser-foot.

Sadly, they’re not easy to find. The bed-extension table is of very simple construction, and it wasn’t uncommon for them to be thrown out or lost due to their rather bland and simple appearance. Unless you knew what you were looking at, the extension-table looks like just another plank of wood.

I discovered one recently at an antiques shop, along with a box of other bits and pieces, and snapped it up then and there. The standard Singer bed-extension table measures 8.5 inches wide (the width of the machine-bed), and about eight inches long.

Finding that final, missing piece means that the machine is finally back in its original and complete condition, having been reunited with all the items that would’ve come with it when it was purchased brand-new from the shop.

Like New!

The pictures below show the machine looking as it would’ve done back in the 1950s, complete with the parts that would’ve come with it when purchased brand-new:

Bits and pieces such as zigzaggers, buttonholers and other bits and pieces were purchased separately on a required basis. But those photos illustrate what came with the machine when it was brought home for the first time.

This model, the Singer 99 series, was manufactured from the mid-1920s up until the late 1950s, and came as a handcrank machine, or as a knee-lever machine. Knee-lever machines started coming out in the 1930s, and both hand-crank and knee-lever models were produced side by side until the model ceased production ca. 1958.

The body of the Model 99 changed significantly in the later years of its production, but the machine as it appears here would’ve been identical to one from the 1920s, minus the motor and the knee-lever, and with a spoked, instead of solid balance-wheel, with a crank-handle bolted to the side.

Built like a watch? More like a tank. The Model 66, the 99’s immediate predecessor, was highly popular, but extremely heavy and cumbersome.

The Singer 99 model was designed to be a 3/4 size “portable” machine, a step down from the full-size Singer 66 model, which came out in 1905. The 99 was designed to overcome the 66’s problems with regards to size and weight.

This advertisement from 1928 emphasizes the new machine’s portability! And with portability comes choice! You can now sew anywhere you want! Bedroom, living-room, parlour, guestroom, even outside if you wanted to. The one thing this advertisement does NOT publicise is the fact that this machine is DAMN HEAVY.

Keep in mind that the 99 was supposed to be a “portable” machine, a step down from the larger and highly popular 66 model. But despite the downsizing, the 99, complete with all its bits and pieces, still weighs in at 33.25lbs, or just over 15kg! I know this because I weighed it myself. Not so portable now, is it?

Nevertheless, it’s a practical, popular, stylish and robust machine, well worth restoring and using.

 

19 thoughts on “The Idiot and The Odyssey: The Complete Restoration of my Grandmother’s Singer Sewing Machine

  1. Robin James says:

    this is a great story, a love affair with Granny’s awesome machine.Much helpful info here for us beginners who are also restoring a 99.Love the humour!

     
    • scheong says:

      Hi Robin, thanks for the comment. This machine was an integral part of my childhood. I saw it every day when I was growing up, sitting on the desk in my grandmother’s bedroom. I couldn’t let it rust and crumble. I wanted to restore it and preserve it for posterity.

       
  2. Robin James says:

    this is a great story, a love affair with Granny’s awesome machine.Much helpful info here for us beginners who are also restoring a 99.Love the humour!

     
    • scheong says:

      Hi Robin, thanks for the comment. This machine was an integral part of my childhood. I saw it every day when I was growing up, sitting on the desk in my grandmother’s bedroom. I couldn’t let it rust and crumble. I wanted to restore it and preserve it for posterity.

       
  3. Brilliant job! It doesn’t matter how long it takes – I had a machine in the cupboard for over twenty years before I cleaned it up. There’s such great satisfaction in getting a machine up and running again. I hope that sooner or later a member of your family will start using it.

    Love,
    Muv

     
  4. Brilliant job! It doesn’t matter how long it takes – I had a machine in the cupboard for over twenty years before I cleaned it up. There’s such great satisfaction in getting a machine up and running again. I hope that sooner or later a member of your family will start using it.

    Love,
    Muv

     
  5. Josh says:

    It looks good, I would have liked to see a larger picture of the finished project though!

     
  6. Josh says:

    It looks good, I would have liked to see a larger picture of the finished project though!

     
  7. Noralia says:

    I have the Singer “portable” sewing machine. It IS heavy, more of the reason for me not to use it since 2004 (oh, wow).

    I was spending some time in the house’s store recently (looking for the trusty ‘bahulu’ egg whisk) when I found the sewing machine – at the corner at the store.

    Since I have this crazy urge of sewing ‘everything that I want’, I think I shall restore it instead of buying a new plastic-made ones.

    Now… I was wondering on how should I find somebody to help me with this restoring task – in Shah Alam? *sigh

     
    • Hui Boon says:

      Hi I hope I am not too late but I just got my singer restored in Klang. But do google Singer representative. You will be surprised to find that these people do exist in our corner of the world.

       
  8. Noralia says:

    I have the Singer “portable” sewing machine. It IS heavy, more of the reason for me not to use it since 2004 (oh, wow).

    I was spending some time in the house’s store recently (looking for the trusty ‘bahulu’ egg whisk) when I found the sewing machine – at the corner at the store.

    Since I have this crazy urge of sewing ‘everything that I want’, I think I shall restore it instead of buying a new plastic-made ones.

    Now… I was wondering on how should I find somebody to help me with this restoring task – in Shah Alam? *sigh

     
    • Hui Boon says:

      Hi I hope I am not too late but I just got my singer restored in Klang. But do google Singer representative. You will be surprised to find that these people do exist in our corner of the world.

       
  9. carol howell says:

    I know your Grandma would be so happy to see how you have so lovingly brought her beloved machine back to life again. Then to find all the extra bits and pieces… well, that is just the frosting on the cake. The machine is gorgeous! Now you need to learn to sew! I can just see Grandma smiling at that!

     
  10. Tracy says:

    I just stumbled upon your blog post in researching my great-grandmother’s machine. A lot of people I have asked about it would rather tell me it’s worth, and move on. Unfortunately, I have no use in what it’s worth monitarily…..I want to use this baby!!
    Thank you for giving me hope, and the encouragement to move forward without any hesitation in getting my find running again. The pictures and info you provided are priceless!! I hope someday to find all the pieces to the machine I found. My great-grandmother was quite the seamstress in her day…. 17 years ago, we helped to clean our her house to make room for our family to move in and help care for her. The second floor of her house was divided into two bedrooms, which were packed floor to ceiling with old fabrics and notions. Once the decaying stockpile was under control, a couple machines were found in their set-up state, waiting for my great-grandmother’s next project. It was an inviting sight….
    I am thrilled. With a bit of elbow grease, patience, and a scavenger hunt ahead of me, I am positive I can carry out her legacy. Thank you again for what you’ve posted. I now have an image to go by, which I’m hoping will help me to solve this puzzle, and bring this beauty back to life…..reunited with all her separated parts.
    Tracy

     
  11. Tracy says:

    I just stumbled upon your blog post in researching my great-grandmother’s machine. A lot of people I have asked about it would rather tell me it’s worth, and move on. Unfortunately, I have no use in what it’s worth monitarily…..I want to use this baby!!
    Thank you for giving me hope, and the encouragement to move forward without any hesitation in getting my find running again. The pictures and info you provided are priceless!! I hope someday to find all the pieces to the machine I found. My great-grandmother was quite the seamstress in her day…. 17 years ago, we helped to clean our her house to make room for our family to move in and help care for her. The second floor of her house was divided into two bedrooms, which were packed floor to ceiling with old fabrics and notions. Once the decaying stockpile was under control, a couple machines were found in their set-up state, waiting for my great-grandmother’s next project. It was an inviting sight….
    I am thrilled. With a bit of elbow grease, patience, and a scavenger hunt ahead of me, I am positive I can carry out her legacy. Thank you again for what you’ve posted. I now have an image to go by, which I’m hoping will help me to solve this puzzle, and bring this beauty back to life…..reunited with all her separated parts.
    Tracy

     

Leave a Reply

Your email address will not be published. Required fields are marked *