Singer Sewing Machine – Bed-Extension Table

It’s taken years and months, but my grandmother’s Singer 99k vintage sewing-machine is finally, and at last, complete! It has reached this level of completion thanks to the procurement of the last, and most hard-to-find Singer sewing-machine accessory…the bed-extension table. The extension-table may be seen here, hooked onto the end of the needle-bar side of the sewing-machine:

It’s the thing with the three spare vintage lightbulbs on top. The lightbulbs are spares for the one which goes into the light-socket at the back of the sewing-machine. They came as part of the package.

The extension-table came as standard with some models of vintage Singer sewing machines, such as the Singer Model 99 and it’s variants. However, not all of Singer’s sewing-machines were sold with this very handy feature included, which I think is a pity. The table measures roughly eight inches by eight inches, and the steel hook at the end simply slots into the lock-plate of the machine-bed. It extends the sewing-machine bed. That’s why it’s called a bed-extension table. Duh!

Sadly, these handy little extension-tables are not easy to find these days, and I had almost given up hope of ever getting one. I had even considered fabricating a homemade one! But fortunately, I found this, instead.

Their handiness lies in the fact that they give you a larger work-area when sewing, to stop your pieces of fabric from flopping off the end of the sewing-machine (and possibly pulling out of alignment). They also give you somewhere to rest your left hand and arm as you feed the fabric through the machine.

This is what the extension-table looks like, when it’s housed inside the case:

You can see it in this picture from a 1930s Singer 99k user-manual. It’s on the bottom of the picture (labeled ‘D’ in this picture).

It’s rather amazing how much those innovative Singer chaps could cram into such a restricted space as the lid of a sewing-machine! This is what the same arrangement looks like in real life; again, using my grandmother’s 99k as the example:

In all the same positions, you can see the green SINGER accessories box (on the left), the ‘?’-shaped knee-lever at the back, the oval-based green SINGER oil-can on the right, and at the bottom, the extension-table. Amazingly, even with all this stuff in-place, you can still put the lid comfortably over the top of the sewing-machine and lock it down tight!

Bed-extension tables. If you have a vintage Singer sewing machine and you don’t have one of these…start looking for one. They’re getting harder and harder to find, so don’t waste time!

 

2 thoughts on “Singer Sewing Machine – Bed-Extension Table

  1. Robin James says:

    this is a most interesting love affair with a dear old singer 99.Your restoration blog was inspirational.I used it to rescue a $5 one & restore it for use.Thanks & God bless you.I am now hunting for parts/accessories for mine.

     
    • scheong says:

      Hi Robin,

      The best of luck in finding parts and pieces. It will take you a VERY long time to find everything. It took me month after month to finally track down all the tiny fiddly little bits and pieces that I needed! But I’m very happy with the results.

       

Leave a Reply

Your email address will not be published. Required fields are marked *